Embroidery stitch Totally Explained

Everything about Embroidery Stitch totally explained

In everyday language, a stitch in the context of embroidery or hand-sewing is defined as the movement of the embroidery needle from the backside of the fabric to the front side and back to the back side. The thread stroke on the front side produced by this is also called stitch. In the context of embroidery, an embroidery stitch means one or more stitches that are always executed in the same way, forming a figure of recognisable look. Embroidery stitches are also called stitches for short.
Embroidery stitches are the smallest units in embroidery. Embroidery patterns are formed by doing many embroidery stitches, either all the same or different ones, either following a counting chart on paper, following a design painted on the fabric or even working freehand.

Technique

Basically, there are two ways to do embroidery efficiently and orderly. What works better depends on the stitches and materials used, and on personal preference.

Hand-sewing method

The needle is brought to the upside of the fabric. For doing the stitch properly, it's inserted into the fabric and brought back to the surface in one movement. Then the thread is pulled through. The same method is used for plain hand sewing.
A thimble is usually used on the middle finger to avoid minor injury. Once the needle is inserted into the fabric, the hooded middle finger is used to push it through; the thumb and index finger grab the needle at the front as soon as possible and pull at the same time. This can speed up working when the embroiderer is used to it.
This method can be done using an embroidery frame or free-hand, but usually an embroidery frame or hoop is used to make work easier. The technique uses frames that allow for adjustment of fabric tension, as the fabric can't be too strongly stretched. in order to allow inserting the needle without pulling the fabric too much.

Stab method OR Maggam work

This method is popular in India.
   The needle is inserted into the fabric at a 90 degree angle, then the thread is pulled through. Then, the needle is again inserted, this time from the underside to the surface; again, the thread is pulled through.
   A thimble isn't usually required to avoid injury with this method, but is sometimes used to make pushing the needle through easier.
   A frame or hoop is used. A mounted hoop or frame makes the work faster, such that both hands are free for the embroidery. The dominant hand is held under the fabric, the non-dominant hand above it, and the needle is handled by each respective hand without necessity for hand position changes.

Common Stitches

Embroidery uses various combinations of stitches. Each embroidery stitch has a special name to help identify it. These names vary from country to country and region to region. Some embroidery books will include name variations. Taken by themselves the stitches are mostly simple to execute, however when you put them together the results can be extremely complex.

Straight stitches

Straight stitches pass through the fabric ground in a simple up and down motion, and for the most part moving in a single direction. Examples of straight stitches are:

Running or basting stitch
Simple satin stitch
Algerian eye stitch
Fern stitch Straight Stitches that have two journeys (generally forwards and backwards over the same path). Examples:
Holbein stitch, also known as the double running stitch
Bosnian stitch

Back stitches

Back stitches pass through the fabric ground in an encircling motion. The needle in the simplest backstitch comes up from the back of the fabric, makes a stitch to the right going back to the back of the fabric, then passes behind the first stitch and comes up to the front of the fabric to the left of the first stitch. The needle then goes back to the back of the fabric through the same hole the stitch first came up from. The needle then repeats the movement to the left of the stitches and continues. Some examples of a back stitch are:

Stem stitch or outline stitch

Split stitch. The needle pierces the thread as it come back up.

Crewel stitch

Chain stitches

Chain stitches catch a loop of the thread on the surface of the fabric. In the simplest of the looped stitches, the chain stitch, the needle comes up from the back of the fabric and then the needle goes back into the same hole it came out of, pulling the loop of thread almost completely through to the back; but before the loop disappears, the needle come back up (a certain distance from the beginning stitch -the distance deciding the length of the stitch), passes through the loop and prevents it from being pulled completely to the back of the fabric. The needle then passes back to the back of the fabric through the second hole and begins the stitch again. Examples of chain stitches are:

Chain stitch

Lazy Daisy stitch, or detached chain. The loop stitch is held to the fabric at the wide end by a tiny tacking stitch.

Spanish Chain or Zig-zag Chain

Buttonhole stitches

Buttonhole or blanket stitches also catch a loop of the thread on the surface of the fabric but the principal difference is that the needle doesn't return to the original hole to pass back to the back of the fabric. In the classic buttonhole stitch the needle is returned to the back of the fabric at a right angle to the original start of the thread. The finished stitch in some ways resembles a letter "L" depending on the spacing of the stitches. For buttonholes the stitches are tightly packed together and for blanket edges they're more spaced out. The properties of this stitch make it ideal for preventing raveling of woven fabric. This stitch is also the basis for many forms of needle lace. Examples of Buttonhole or Blanket Stitches.

Blanket stitch

Buttonhole stitch

Closed Butt hole stitch, the tops of the stitch touch to form triangles

Crossed Butt hole stitch, the tops of the stitch cross

Buttonhole stitches combined with knots:

Top Knotted Buttonhole stitch
German Knotted Buttonhole stitch
Tailor's Buttonhole stitch

Feather stitches

Feather or fly stitches also catch a loop of thread on the surface of the fabric but they differ from buttonhole stitches in that the catching of the loop isn't at right angles or it alternates from side to side. The result is a very naturalistic looking stitch that's often used to make leaves and branches. Examples of fly stitches are:

Fly stitch, or Y stitch

Feather stitch

Faggoting stitch, or Straight Open Cretan

Cretan Stitch

Cross stitches

Cross stitches or cross-stitch have come to represent an entire industry of pattern production and material supply for the craft person. The stitch is done by creating a line of diagonal stitches going in one direction, usually using the warp and weft of the fabric as a guide, then on the return journey crossing the diagonal in the other direction, creating an "x". Also included in this class of stitches are:

Herringbone stitches, including the hem stitch

Breton stitch, here the threads of the "x" are twisted together

Sprat's Head stitch

Crow's Foot stitch, these last two stitches are often used in tailoring to strengthen a garment at a point of strain such as a pocket corner or the top of a kick pleat. Many examples of cross stitches can be found here

Knotted stitches

Knotted stitches are formed by wrapping the thread around the needle, once or several times, before passing it back to the back of the fabric ground. This is a predominate stitch in Brazilian embroidery, used to create flowers. Another famous form of embroidery that uses knots is Candlewicking, where the knots are created by forming a figure 8 around the needle. Examples of knotted stitches are:

French knot, or twisted knot stitch

Chinese knot, which varies from the French knot in that it takes a tiny stitch in the background fabric while creating the knot

Bullion knots

Coral stitch

There are also more complex knotted stitches such as:

Knotted Loop stitch
Plaited Braid stitch
Sorbello stitch
Diamond stitch

Knotted edgings based on buttonhole stitches include:

Antwerp edging stitch
Armenian edging stitch

Couching and laid work

Couching or laid stitches involve two sets of threads, the set that's being 'laid' onto the surface of the fabric and the set which attach the laid threads. The laid threads may be heavier than the attaching thread, or they may be of a nature that doesn't allow them to be worked like a regular embroidery thread, such as metal threads. The stitches used to attach the laid thread may be of any nature; cross stitch, buttonhole stitch, straight stitch; but some have specific names:

Pendant couching,

Bokhara couching

Square laid work

Oriental couching

Battlement couching

Klosterstitch

Roumanian couchingFurther Information

Get more info on 'Embroidery Stitch'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://embroidery_stitch.totallyexplained.com">Embroidery stitch Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.